ADDONICS TECHNOLOGIES
Model: ADSAUSPCB
ADDONICS TECHNOLOGIES
Model: ADSAUSPCB
SATA Port
SATA Port
Drive Activity
Drive Activity
LED Connection
LED Connection
2-Pin Power
Connector
2-Pin Power
Connector
USIB Connector
USIB Connector
Red wire
Red wire
Black wire
Black wire
Correct way of
Correct way of
connecting the 2-pin power cable
to the 2-pin connector on the
adapter
connecting the 2-pin power cable
to the 2-pin connector on the
adapter
Hardware Installation:
Hardware Installation:
Step 1. Connect the2-pinpower cabletothe 2-pinpowerconnector ontheadapter. Besure
to connectthe redwire to thepinwith+5V label.
Step 1. Connect the2-pinpower cabletothe 2-pinpowerconnector ontheadapter. Besure
to connectthe redwire to thepinwith+5V label.
Step 2. Connect a SATA cable to the SATA connector on the adapter and the other
end to the SATA device.
Step 2. Connect a SATA cable to the SATA connector on the adapter and the other
end to the SATA device.
Step 3. Connect a USIB cable to the USIB connector on the adapter and the other
end to the host
Step 3. Connect a USIB cable to the USIB connector on the adapter and the other
end to the host
TECHNICAL SUPPORT
TECHNICAL SUPPORT
Email:
Internet:
Email:
Internet:
Technical Support (8:30 am to 6:00 pm PST)
Technical Support (8:30 am to 6:00 pm PST)
Phone:
Email:
408 433-3855
Phone:
Email:
408 433-3855
|